New Items

Product Details:

Pravin Steel India well-known manufacturer, supplier and exporter of Rods, which is an iron alloy with a very low carbon (less than 0.08%) content in contrast to cast iron (2.1% to 4%), and has fibrous inclusions known as slag up to 2% by weight. Many items, before they came to be made of mild steel, were produced from rods, including rivets, nails, wire, chains, rails, railway couplings, water and steam pipes, nuts, bolts, horseshoes, handrails, wagon tires, straps for timber roof trusses, and ornamental ironwork. Rods might be round, square, rectangle or flat, and flat rods might be narrow or broad. Rod iron is usually a cut from flat bar iron in a slitting mill to provide the raw material for nails.

Range :
0.1 mm to 500 mm dia in 100 mm to 6000 mm length available with nace mr 01-75

Form :
Round, square, hex (a/f), bush, rectangle, flat, wire mesh

Finish :
• bright
• black
• polish

Stainless steel bar :Standard :
astm / asme sa 479 & a182

Grade :
304 , 304l , 304h, 309s , 309h , 310s, 310h , 316 , 316l, 316h , 316ti , 317l , 321 , 321h , 347 , 347 h , 409, 410s, 420, 430, 904l

Duplex steel bar & super duplex bar :Standard :
astm / asme sa 276

Grade :
uns no. S 31803 , s 32205 , s 32550 , s 32750 , s 32760, 2507, 2205 , f 51

Aluminium rods :Standard :
astm b221

Grade :
2024, 6061, 6063, 6082 ,6101, 7075.

Titanium rods :Standard :
astm b348, f67, f 136 , ams 4928

Grade :
grade 1 , 2, 4, 5,6, 7, 9, 19, 23 , ti 6al2sn 4zr 2mo , ti 6al 6v 2sn, titanium 10v 2fe 3al, ti 8al 1mo 1v, ti 6al 2sn 4zr 6mo.

Carbon steel bar :Standard :
astm / asme a 105

Alloy steel bar :Standard :
astm / asme a/sa 182

Grade :
f 5, f 9, f 11, f 12, f 22, f 91.

Monel rods :Standard :
astm b 637 ,b446, ams 5666, bs3076
• inconel k600 bar – uns n06600
• inconel 601 bar – uns n06601
• inconel 625 bar – uns n06625
• inconel 800 bar – uns n08800
• inconel 800h bar – uns n08810
• inconel 825 bar – uns n08825

Nickel bar :Standard :
astm b160

Grade : 
nickel 200 bar – uns n02200, nickel 201 bar – uns n02201

Hastelloy bar :Standard :
astm/asme sb575 , sb637

Grade :
hastelloy c276 bar – uns n10276, hastelloy c22 ( uns no.6022), hastelloy c4 (uns no.6455), hastelloy c2000

Copper alloy bar :
Electrolytic copper, electrolytic tough pitch copper, deoxidised copper, general purpose commercial copper

Copper nickel bar :
• astm b466, b111, b151, and b171
• c 70600 - copper nickel 90/10 bar
• c 71500 - copper nickel 70/30 bar

Gunmetal, phospher bronze :
85/5/5/5, 88/10/2, 90/10, ingots, hollow, bar, bushes & sheet, strips, wires etc. As per requirement

Other materials :
• copper nickel bar
• brass bar
• phosphorus bronze bar
• gun metal bar
• 17-4ph
• 15.5 ph

Product Details:

We are the leading suppliers in the market for offering Stainless Steel Perforated Sheets in a wide range to our clients.This products manufactured,supplied export by us is renowned for its reliability, durability and optimum performance. These are offered in various shapes and sizes based on the customer's requirement.

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1

Pravin Steel India is a renowned exporter, manufacturer and supplier of Hexagon Bushing Forged Pipe Fittings in the steel market industry worldwide. Hexagon bushing pipe fitting is manufactured by brass material and has a male NPT (National Pipe Taper) threaded correlation and a female NPT threaded connection. This hex bushing fitting connects two pipes with different diameters connected to it, and has a hexagonal head for a larger bearing surface when fiddling by means of the fitting all the way through a wrench. Bushing is manufactured in dissimilar grades of standard ranges and meets its terms through national and international standards.

Type: 
Socket weld (s/w) & screwed (scrd) – npt, bsp, bspt

Range: 
Forged fittings 15 nb to 100 nb in 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75.

Form: 
Elbow, tee, union, coupling, cap, nipple, bush, plug, hydraulic fittings

Features :
Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable

Stainless Steel Socket Weld Fittings :Standard : 
ASTM / ASME A/SA 182

Grade :
F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Duplex Steel Socket Weld Fittings :Standard :ASTM / ASME A/SA 182

Grade : 
F 44, F 45, F51, F 53, F 55, F 60, F61

Aluminium Socket Weld Fittings :Standard :ASTM B247, B361.

Grade : 
2024, 6061, 6063, 6101, 7075

Titanium Socket Weld Fittings :Standard :ASTM B381.

Grade : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23

Carbon Steel Socket Weld Fittings :Standard : ASTM A 105/A694/ A350 LF3/A350 LF2.

Grade : 
F42/46/52/56/60/65/70

Low Temperature Carbon Steel Socket WeldFittings :Standard : 
ASTM A 350 LF2 / A350 LF3

Alloy Steel Socket Weld Fittings :Standard :ASTM A182

Grade : 
F1/F5/F9/F11/F22/F91

Copper Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 61 / 62 / 151 / 152.

Grade : 
UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640

Nickel Alloy Socket Weld Fittings :Standard :ASTM / ASME SB 564 / 160 / 472
• Nickel 200 – UNS N02200  
• Nickel 201 – UNS N02201 
• Monel 400 – UNS N04400
• Monel K500 – UNS N05500  
• Inconel K600 – UNS N06600 
• Inconel 601 – UNS N06601
• Inconel 625 – UNS N06625  
• Inconel 800 – UNS N08800  
• Inconel 800H – UNS N08810
• Inconel 825 – UNS N08825  
• Hastelloy C276 – UNS N10276 
• Alloy 20 – UNS N08020

Other :
• Hydraulic Fittings 
• Instrumentation Fittings

Test Certificate :
Manufacturer Test Certificate as per EN 10204 / 3.1